Cen-Stat X45 and X90 ATEX / FM approved clamps, cables and reels The Cen-Stat X45 and X90 are general purpose static earthing clamp certified to ATEX and FM guidelines for safe use within hazardous areas. The clamps are made from corrosion resistant stainless steel (304) and contain two hard wearing tungsten carbide tips that bite through rust, paint and product deposits. It is designed specially for use on large containers, drums and IBCs.
Tungsten carbide tips		ATEX / FM approved static earthing clamp. Electrical continuity from tips to cable connection of less than 1 ohm. Vibration resistant contact with positive spring action. Corrosion resistant stainless steel construction.

5 good reasons to specify ATEX & FM approved clamps

1.   Clamp Pressure Testing
      Ensures the clamp is capable of establishing and maintaining low resistance electrical
      contact with equipment (FM approvals).

2.   Electrical Continuity Testing
      Ensuring the continuity from the tip throughout the clamp is less than 1 ohm (FM
      approvals).

3.   High Frequency Vibration Testing
      Ensures the clamp is capable of maintaining positive contact when attached to vibrating
      equipment (FM approvals).

4.   Mechanical Pull Testing
      Ensures the clamp cannot be pulled off the equipment without an intentional application of
      force (FM approvals).

5.   Sources of mechanical sparking
      Ensures no mechanical sparking sources are present in the clamp (ATEX certification)